Hot-dip galvanised S220GD/DX51D

Used for everything from simple bending and pressing to advanced drawing and roll-forming. This sheet is available for processing and delivery in thicknesses from 0.35-4.00 mm.
We have extensive experience working with steel mills both inside and outside Europe. Would you like dimensions/grades other than those shown here? Don't hesitate to contact us.

 

Width100012501500
0.40 Z100MAC | Z275MAC 
0.50 Z275MAC 
0.60 Z275MAC 
0.70 Z100MAC | Z275MACZ275MAC
0.80Z275MACZ275MACZ275MAC
0.90 Z275MACZ275MAC
1.00Z275MACZ100MAC | Z275MACZ275MAC
1.25Z275MACZ275MACZ100MAC | Z275MAC
1.50Z275MACZ100MAC | Z275MACZ275MAC
2.00Z275MACZ100MAC | Z275MACZ275MAC
2.50 Z275MAC 
3.00   

Mechanical properties - Mild steel

 

EN 10327Yield strength Re (N/mm2)Tensile strength Rm (N/mm2)Elongation A80 min. (%)*
DX51DMin. 140270 - 50022
S220GD22030020

The values are based on samples taken transverse to the rolling direction. *For ≤0.70 mm, a value two units lower applies.

CONTACT US

We're here for you

Do you have questions about our products, or would you like to discuss a project? Our team is happy to help.

See all contacts